Excella Electronics

We are engaged in offering this Products to our clients. Our range of all products is widely appreciated by our clients.

The WR individual wire rope sensor provides an easy and precise solution for controlling the load in traction lifts by measuring the individual tension on each wire rope.

FEATURES:

• Automatic calibration using the wire rope diameter,meaning no need for test weights.
• Quick and easy installation.
• Reduced dimensions.
• For any type of Wire ropes and Flat belts.
• Integrated SW to correct weight increases due to compensating chain.
• 3 programmable relay output for Presence,Full load & Overload.
• Display to Visualize the real weight.
• LM3D Options:

 Analogue output in mA (0-20,0-24 & 4-20).      Voltage Output (+/- 10VDC)or (+/- 5VDC) or (0-10 VDC)or (0-5 VDC) or (-10/0/+10VDC)

• Communications available:RS485.
• Suitable for 1:1,2:1 & 4:1 roped installations.
• Cabin indicator output.

SPECIFICATIONS:

• Supply Voltage : 230 VAC
• Disabling Input : 24-230 VAC/DC
• Relay Contacts : 250VAC 3A
• Operating Capacity (RC) : 1000 kg/Sensor
• Safe Load : 150% RC
• Operating Temperature : -10Degree Celcius/50Degree Celcius

This wire ropes load weighing device with an Open-Style connector allows managing the load in an elevator easily and precisely.The unit uses CANopen communications protocol and its calibration and configuration is very easy.

FEATURES:

• Automatic calibration using the wire rope diameter,meaning no need for test weights.
• Universal clamps for all type of rope distribution.
• BUS connection type:DS303-1 connection,open style connector.
• LED lights indicate the state of the NODE within the network according to DS303-3 standard.

SPECIFICATIONS:

• Supply Voltage : 230 VAC
• Communications : CANopen
• Relay Contacts : 250VAC 3A
• Operating Capacity (RC) : 3500Kg
• Safe Load : 150% RC
• Operating Temperature : -10Degree Celcius/50Degree Celcius

LMC-CAN (UNIVERSAL CONTROL UNIT FOR CAN OPEN):
The universal LM-CAN control unit can be used with all sensors (i.e. Wire rope,Cabin,Beam and Bedframe) manufactured by MICELECT.This unit uses CANopen communications protocol and its calibration and configuration is very easy.Other all features same as ILC-CAN.

The LMC wire rope sensor provides an easy and precise solution for controlling the load in traction lifts with all types of roping (1:1,2:1 & 4:1). Its quick and easy installion (only 5 mins) with seperate control unit and automatic calibration make it the perfect solution for both modernizations and new installations with complicated dimensions. It is recommended to use this type of sensor when a signal is required by the lift controller to control rollback.

FEATURES:

• Automatic calibration using the wire rope diameter,meaning no need for test weights.
• Quick and easy installation.
• Universal clamps for all type of rope distribution.
• Integrated SW to correct weight increases due to compensating chain.
• 3 programmable relay output for Presence,Full load & Overload.
• Display to Visualize the real weight.
• LM3D Options:
• Analogue output in mA (0-20,0-24 & 4-20).
• Voltage Output (+/- 10VDC)or (+/- 5VDC) or (0-10 VDC)or (0-5 VDC) or (-10/0/+10VDC)
• Communications available:RS485.
• Suitable for 1:1,2:1 & 4:1 roped installations.
• Cabin indicator output.

SPECIFICATIONS:

• Supply Voltage : 230 VAC
• Disabling Input : 24-230 VAC/DC
• Relay Contacts : 250VAC 3A
• Operating Capacity (RC) : 4000Kg
• Safe Load : 150% RC
• Operating Temperature : -10Degree Celcius/50Degree Celcius

CAB800+LM3D load weighing system: The ultimate precision for lift weight control, no matter the lift type.
Reliable and highly accurate, it's perfect for any setup needing precise load control, like detecting "presence" inside the cabin.
A top choice for new installations or where accuracy and reliability are key. Simplify your lift control with CAB800.