Digital Instrumnets

Product Details:

FEATURES :
Mul Funcon, one instruments combine photo tach. (RPM)& contact tach. (RPM, m/min, /min) wide measuring range:2 RPM to 100000RPM
The last value/max, value/min, value will be automacallystored in memory and can be obtained by pressing MEMORYCALL buon.
High visible, insignificant zero suppression LCD display givesexact rpm, with no guessing or errors & saves baery energy.
TECHNICAL SPECIFICATION :
Display : 5 Digits, 10mm (0.4") LCD (Liquid Crystal display)with Funcon annunciaon.
MEASUREMENT :
Non - contact : 5 to 99,999RPMContact Tach mode: 3 to 19990SURFACE SPEED (m/min.) : 0.5 to 1999 m/minSURFACE SPEED (/min.) : 0.5 to 6560 /min
RESOLUTION :
Non - Contact Mode : 0.3RPM (0.5 to 1000 RPM) 1RPM (Above 1000 RPM)Contact Tach Mode: 0.2 (3-1000RPM) 1 RPM (Above 1000 RPM)SURFACE SPEED (m/min.) : 0.02m/min. (0.5 to 99.99 m/min.) 0.2m/min. (Above 100 m/min.)SURFACE SPEED (/min.) : 0.1/min. (0.2 to 999.9 /min.) 1/min. (Above 1000 /min.)ACCURACY: (0.05 + 1 digit)
SAMPLING TIME:
Non Contact Mode: (1 sec. over 60 RPM)Contact Mode: (1 sec. over 6 RPM)
NON CONTACT TIME:
Detecng distance : 50-150mm (typical Max. 300mm, depending upon ambient light)
Baery: 4 x 1.5 V AAOperang Temperature : 10-50 Deg. CWeight: 300 gcm.
ACCESSORIES:
Carrying Case: 1 pc.Reflecng tape marks (600mm) - 1 pc.RPM Adapter (CONE) - 1 pc.RPM Adapter (Funel) - 1 pc.Surface Speed Test Wheel - 1 pc.

Product Details:

SPEED MONITOR

Application:This unit is microprocessor based Tacho-meter with high low speedswitch. This unit measures the speed of motor in RPM. it also give twohigh speeds and two low speeds limit indications with relay output.The speed limit set by the users, using membrane keypad. it alsokeeps record of the highest speed achieved by the motor. To removechattering of relay +/- 3 RPM HYSTERESIS is provided.It measure the rotational speed, linear speed and machine cycles. therelay o/p is open when the speed is below the set point and closedwhen the speed is above the set point.The changes over contact relay that could be used either for alarm orcontrol, purpose during the monitoring process. this is moreconvenient and more accurate than conventional means. It isequipped with analog signal output, which could be utilized forvarious display indications and far more precise control. It is ideal forapplications in monitoring under & over speed stop in overloadconditions.
Features:

• Easily programable from the front panel Keyboard.
• Screw terminal connectors for easy installation.
• Remote facility (optional).
• High speed recording facility.

TECHNICAL DETAILS:

• Display : 6+4 Digit LED Display.
• Six 0.56"inches High Bright Red LED Display for Data and RPM Display.
• Four 0.56" inches High Bright GREEN LED Display Set Value.
• Display Range : 3 - 9999 rpm
• Inputs Signal : Proximity Sensor, Encoder, (Analogue I/p: 0-10VDC & 4-20mA)
• Accuracy : 0.05%
• PPR : (3-255 Programmable)
• Set Point : 4 Nos. (L, LL, H & HH)
• Two Nos Under Speed & Two Nos Over Speed, (IF you want more set point, It also available on request.)
• Relay Outputs : 04 Nos.
• Relay Contact Rating : 230 V AC-5 A or 110V DC-1A or 24V DC-7 A
• Alarm Conditions : Under Speed / Over Speed
• Start up Delay : 0 to 60 seconds.
• Indications LED : RUN / PROG / ERROR /H / HH/LL / L
• Analog Output : 4 to 20mA or 0 - 10 VDC (Programable)
• Supply Voltage : 24VDC / 110VDC / 220VDC / 90-270VAC, 50Hz
• Operating Temperature : 0 - 50 Deg C
• Storage Temperature : 5 Deg C to 70 Deg C
• Housing : ABS Plastics
• Dimension : 96 X 96 X 150 (Approx)
• Cut-out : 92mm X 92mm
• Weight :300g

Additional Information:

• Delivery Time: 1 week

Product Details:

Application:
This unit is microprocessor based counter are very useful device. Acommon application is in machine motion counter where devicecalled encoder, sensor convert to mechanical rotation into a series ofelectrical pulses, suitable for any winding machine. It providesmodern effective means of obtaining displaying and evaluatingproduction information.
Features:

• Easily programable from the front panel keyboard.
• Screw terminal connectors for easy installation.
• Universal sensor inputs.
• Length measures up to 999999 mtrs.

Display Data Capacity :
MPM: Meters Per Minute - The take Up speed of the yarn. Maximum - 9999 MPM.LENGTH: Length of the yarn in meters in current cycle. Maximum Range: 999999 mtrs.TP: Total Production in 1000 meters, Maximum - 99999.9KmTT: Total run time of the machine, Maximum - 99999.9 Hrs.
Technical Details:

• The Four 0.3'’ inches High Bright Green LED Display is use for Speed & Title display.
• The Six 0.3" inches High Bright Red LED Display is use for length in mtrs.
• TOTAL PRODUCTION in 1000 Mtrs, & TOTAL TIME (Hr. Meter) Display.
• Keyboard : Tactile membrane keyboard.
• Data Storage : In case of power fail, data retain in battery back up RAM.
• Inputs : Proximity Sensors, Encoder, Analogue I/p (0--10VDC or 4-20mA).
• PPR : 1-50 Programmable.
• Set Point : 2 Nos.
• Relay Outputs : Separate Relay o/p is provided for 2 set value, Relay output is momentary.
• Relay Contact Rating : 230 V AC-5 A, 24V DC-7 A.
• Reset : Auto / Manually - From front key & back side connectors.
• Analog Output : 4-20mA, 0-10VDC (This facility on optional).
• Power Supply : 230VAC, ±10% 50Hz 1Ph.
• Accuracy : +/- 1 Count.
• IP Protection : IP 54.
• Operating Temperature : 5 to 60 Degree C.
• Storage Temperature : -10 Degree C to +70 Degree C.
• Housing : ABS Plastics.
• Dimension (Approx) : 96mm X 48mm X 65mm (Depth).
• Cutout : 45mm X 90mm.
• Weight : 250 g.

Product Details:

We design instruments for systems automation.Its simple, sleek, reliable & cost effective.Input Signal from proximity sensor, Magnetic sensor & Encoder.
Application:
Printing Industry,Production Counter Application.Food & Beverage / Packaging Industry.Plastic Industry,
Features:

• Screw terminal connectors for easy installation.
• Its suitable for measures length counting in mtrs, Production
• counter, Ltr., Kgm. & Ltr.

Technical Details

• Digit : Seven 0.36"inches High bright RED LED.
• Display Range : 9999999 Counts.
• Inputs : Proximity Sensors, Encoder & Potential free contact.
• Scale : Calibration in Engineering unit by user.
• Max I/p frequency : 3KHz.
• Supply : 90 - 260VAC, ± 10% 50Hz / 12-24 VDC.
• Size : 36 X 72 X 75 mm (D).
• Cutout : 32 X 68 mm.
• Housing : ABS Plastic.
• Operating Temperature : 5 to 60 Degree C.
• Storage Temperature : - 5 Degree C to + 70 Degree C
• Weight 200 g Approx

Additional Information:

• Delivery Time: 1 week

Product Details:

Introduction:
It’s Designed for operate Low & High Speed Application.Input Signal from proximity sensor, magnetic sensor & encoders.
Application:
This unit is microprocessor based indicator. This can utilized measurethe rotational speed, linear speed & machine cycles. Its is ideal formonitoring continuos speed of machine.
Features:

• Easily programmable from the back terminal.
• Screw terminal connectors for easy installation.
• Take up speed facility.
• MPM / CPM / LPM.

Technical Details:

• Digit : Four 0.56"inches high bright RED LED display RPM.
• Display Range : Auto Ranging 9.999 to 9999.
• Inputs : Proximity Sensors, Encoder & Potential free contact.
• Scale : Calibration in Engineering unit by user.
• Max I/p frequency : 3KHz.
• Supply : 90 - 260VAC,±10% 50Hz / 12-24 VDC.
• Size : 36 X 72 X 75 mm (D).
• Cutout : 32 X 68 mm.
• Housing : ABS Plastic.
• Operating Temperature : 0 - 50 Degree C.
• Storage Temperature : - 5 Degree C to + 70 Degree C

Additional Information:

• Delivery Time: 1 week