Stepper Motor, Drive, Controller

Product Details:

DESCRIPTION:Stepper Motor is a kind of electrical pulses into angular displacment of the implementing agencies, when stepper driver receives a pulse signal, it drives stepper motor rotate in the direction set by fix point of view (and the step angle) the number of pulses to control the angular displacement through the control, to achieve the purpose of accurate positioning, Also can control the pulse frequency to control motor rotation speed & acceleration, so as to achieve the purpose of speed.
FEATURES:

• High Torque Density
• High Torque to inertia for quicker start and stops
• Rugged design and long life bearing
• Higher Power, rare earth magnets
• Holding Torque up to 30Nm
• Smallest Frame size of 39mm square
• Frame size up to 110mm square
• Single Shaft / Double Shaft are available
• Range: 650 gcm to 300Kgcm
• Step Angle Accuracy : ±5 %
• Type : Unipolar / Bipolar

APPLICATION:

• Plastic Bag Making & labeling machines
• Orientation For Tube Filling & Sealing Machine
• Robotic Pick And Place Applications
• Rotary / Linear Indexer, Cut To Length Applications
• X-Y Table
• Engraving machines, Embroidery Machines
• Print Registration For Label Printing Machine
• Hot Foil Stamping, Machine Tools, Special Purpose Machines
• Horizontal Form Fill Seal Packing Machine

Suitable for a wide range of stepper motors, from NEMA size 16 to 42. It can be used in various kind of machine.

Additional Information:

• Delivery Time: 1 week

Product Details:

DESCRIPTION:We are offering new generation stepper driver, Due to the adoption of the advanced Bipolar constant - Current chopper driver technology, It perform stable operation, Provides excellent high torque, Moreover, It significantly reduces the noises and vibration of the operating Motor, We applies drives to 2 Phase & 4 Phase motor 0.4Amp to 8.2Amp with diffrent kind of Micro step The maximum micro step is 51200 step /Rev (micro step 1/256) The Peak Operating Current 1.0Amp to 8.2Amp and the output current has different setting of DIP switches.
FEATURES:

• Protection of Over Voltage, Under Voltage & over current.
• Micro Step Resolution programable.
• Multi stepping allows a low resolution step into produce a higher micro-step output, for smoother motor movement
• Soft start with ‘’NO’’ Jump when power ON.
• Suitable for 2 Phase and 4 Phase Motors.
• Supply Voltage up to 230VAC, 50Hz
• TTL Compatible and optically isolated input.
• Output Current programable, From 0.4 to 8.2Amp, It can also be set via DIP switches.
• Pulse input Frequency up to 200KHz.

APPLICATION:

• Suitable for a wide range of stepper motors, From NEMA16 to 42H.
• It can be applied in variety of automation equipment and Instruments.
• Labeling Machine, Cutting Machine, Packing Machine, Engrawing Machine & CNC m/cs.

Product Details:

We have developed & designed stepper motor controller comprising of Stepper Motor, Drive & HMI controllers, This system is basically a stepper Motor / Servo Motor based system for cutting sealing machines, This systems is widely used in packaging industry in different configuration like Bottom sealing, side sealing & standy pouch. Also use in Lable cutting & paper cutting application. The main advantages being consistent accuracy & fast production.

CUT TO LENGTH CONTOLLER

Features:

• 16X4Line LCD Display.
• 2 Sensor I/ps (1 for Start & 1 for stop) & 1- Relay o/p. with setting facility of : Base speed, Final speed & acceleration.
• Length, Batch Count programable.
• Dimension : 96 X 192 X 65mm D.
• Operating Voltage: 24VDC / 230VAC, 50Hz.

Applications:

• For Packaging, Pharmaceuticals, Plastic, Textile m/cs. etc.

DESCRIPTION:

We have developed & designed stepper motor controller comprising of Stepper Motor, Drive & HMI controllers, This system is basically a stepper Motor / Servo Motor based system for cutting sealing machines, This systems is widely used in packaging industry in different configuration like Bottom sealing, side sealing & standy pouch. Also use in Lable cutting & paper cutting application. The main advantages being consistent accuracy & fast production.

SPOT WELDING M/CS CONTROLLER

FEATURES:

• 16X2Line LCD Display.
• I/p : 2 (1 For M/cs Start & 2nd for Reverse direction.)
• Length & Roller dia programable.
• Operating Voltage: 24VDC.
• Dimension : 96 X 96 X 120mm D.
• Cut-out: 92 X 92 mm.

Applications:

• For Packaging, Pharmaceuticals, Plastic, Textile m/cs. etc.

We have developed & designed stepper motor controller comprising of Stepper Motor, Drive & HMI controllers, This system is basically a stepper Motor / Servo Motor based system for cutting sealing machines, This systems is widely used in packaging industry in different configuration like Bottom sealing, side sealing & standy pouch. Also use in Lable cutting & paper cutting application. The main advantages being consistent accuracy & fast production.

HOT FOIL STAMPING M/CS CONTROLLER
FEATURES:

• 3 foil pull settings for flexibility.
• 16 X4 Line LCD Display
• I/p : 2 (1 For M/cs Start & 2nd for Reverse direction.)
• Speed Programable : : Up to 600 rpm.
• Operating Voltage: 24VDC
• Dimension : 96 X 192 X 65mm D

Applications:

• For Packaging, Pharmaceuticals, Plastic, Textile m/cs. etc.