Overload Rope Sensor

Product Details:

The LMC wire rope sensor provides an easy and precise solution for controlling the load in traction lifts with all types of roping (1:1,2:1 & 4:1). Its quick and easy installion (only 5 mins) with seperate control unit and automatic calibration make it the perfect solution for both modernizations and new installations with complicated dimensions. It is recommended to use this type of sensor when a signal is required by the lift controller to control rollback.

FEATURES:

• Automatic calibration using the wire rope diameter,meaning no need for test weights.
• Quick and easy installation.
• Universal clamps for all type of rope distribution.
• Integrated SW to correct weight increases due to compensating chain.
• 3 programmable relay output for Presence,Full load & Overload.
• Display to Visualize the real weight.
• LM3D Options:
• Analogue output in mA (0-20,0-24 & 4-20).
• Voltage Output (+/- 10VDC)or (+/- 5VDC) or (0-10 VDC)or (0-5 VDC) or (-10/0/+10VDC)
• Communications available:RS485.
• Suitable for 1:1,2:1 & 4:1 roped installations.
• Cabin indicator output.

SPECIFICATIONS:

• Supply Voltage : 230 VAC
• Disabling Input : 24-230 VAC/DC
• Relay Contacts : 250VAC 3A
• Operating Capacity (RC) : 4000Kg
• Safe Load : 150% RC
• Operating Temperature : -10Degree Celcius/50Degree Celcius

Additional Information:

• Delivery Time: 2 to 3 Days.

The ILC2 intelligent wire rope sensor is an easy and precise solution for controlling the load in traction lifts.it''s quick and easy installation and calibration (5 mins.) through the diameter of the ropes make it the perfect solution for lift modernizations in which the capacity is less than 999Kg.
FEATURES:

• Automatic calibration using the wire rope diameter,meaning no need for test weights.
• Quick and easy installation.
• Universal clamps for all type of rope distribution.
• Integrated SW to correct weight increases due to compensating chain.
• 2 programmable relay output for Full load & Overload.
• Integrated display to show weight values upto 999Kg.
• EEPROM to save data memory.
• 2 keys for programming all parameters.
• Suitable for 1:1 roped installations.
• Cabin indicator output.

SPECIFICATIONS:

• Supply Voltage : 24-48 VDC
• Disabling Input : 24-230 VAC/DC
• Relay Contacts : 250VAC 3A
• Operating Capacity (RC) : 3500Kg
• Safe Load : 150% RC
• Operating Temperature : -10Degree Celcius/50Degree Celcius

This wire ropes load weighing device with an Open-Style connector allows managing the load in an elevator easily and precisely.The unit uses CANopen communications protocol and its calibration and configuration is very easy.

FEATURES:

• Automatic calibration using the wire rope diameter,meaning no need for test weights.
• Universal clamps for all type of rope distribution.
• BUS connection type:DS303-1 connection,open style connector.
• LED lights indicate the state of the NODE within the network according to DS303-3 standard.

SPECIFICATIONS:

• Supply Voltage : 230 VAC
• Communications : CANopen
• Relay Contacts : 250VAC 3A
• Operating Capacity (RC) : 3500Kg
• Safe Load : 150% RC
• Operating Temperature : -10Degree Celcius/50Degree Celcius

LMC-CAN (UNIVERSAL CONTROL UNIT FOR CAN OPEN):
The universal LM-CAN control unit can be used with all sensors (i.e. Wire rope,Cabin,Beam and Bedframe) manufactured by MICELECT.This unit uses CANopen communications protocol and its calibration and configuration is very easy.Other all features same as ILC-CAN.

Product Details:

The HPS individual wire rope sensor provides an easy and precise solution for controlling the load in traction lifts,it is used extremely limited headroom.

FEATURES:

• Automatic calibration using the wire rope diameter,meaning no need for test weights.
• Quick and easy installation (5 Mins.).
• Reduced dimensions.
• For any type of Wire ropes and Flat belts.

SPECIFICATIONS:

• Supply Voltage : 230 VAC
• Disabling Input : 24-230 VAC/DC
• Relay Contacts : 250VAC 3A
• Operating Capacity (RC) : 500/1000/5000 kg Sensor
• Safe Load : 150% RC
• Operating Temperature : -10Degree Celcius/50Degree Celcius

Product Details:

The CCP sensor provides an alternative solution for controlling the load in installations where it is not possible to install other devices.The fact that this device can be used with all types of roping 1:1,2:1 & 4:1, make it a good alternative solution in complicated installations.

FEATURES:

• Calibration with test weights.
• High Capacity.
• Integrated SW to correct weight increases due to compensating chain.
• 3 programmable relay output for Presence,Full load & Overload.
• Display to Visualize the real weight.
• Communications available:RS485.
• LM3D Options:

Analogue output in mA (0-20,0-24 & 4-20).
Voltage Output (+/- 10VDC)or (+/- 5VDC) or (0-10 VDC)or (0-5 VDC) or (-10/0/+10VDC)

• Suitable for 1:1,2:1 & 4:1 roped installations.Cabin indicator output.

SPECIFICATIONS:

• Supply Voltage : 230 VAC
• Disabling Input : 24-230 VAC/DC
• Relay Contacts : 250VAC 3A
• Operating Capacity (RC) : 2000Kg./4000Kg.
• Safe Load : 150% RC
• Operating Temperature : -10Degree Celcius/50Degree Celcius